Arduino

This is SparkFun's version of Arduino UNO R3. It has Optiboot bootloader ( used in the Pro series), FTDI (which is rock solid and stable) and R3 shield compatibility. The RedBoard can be programmed over a USB Mini-B cable using the Arduino IDE: Just plug in the board, select “Arduino UNO” fr..

The official Arduino Uno R3 uses ATmega328, and an ATmega16U2 for serial (instead of the 8U2 or FTDI found on previous generations). This allows for faster transfer rates, more memory and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. (which requires spe..

A minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini from SparkFun does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. ..

This small prototyping shield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level. A ProtoShield quickstart guide is a..

Control two DC motors with this motor shield for Arduino. Based on the L298 H-bridge, the SparkFun Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines..

This is a shield for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your project simple. Instead of the more standard UART communication method, the CC3000 module utilizes an SPI interf..

Running out of memory space in your Arduino project? The microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the microSD socke..

This new revision of the SparkFun MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a ful..

The MPR121QR2 IC is a great way to build simple capacitive touch interfaces, and now it’s even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the remaining 3 electrode connections. With this shield you can have a..